Dobro dokazani stellit tipping sistem sa izvrsnom reputacijom.
The stellite is welded on the saw by resistance welding method. The structural condition of the stellite does not change during welding. Cracks and holes in the stellite are thus avoided. The stellite is welded vertically and the tip size can be adjusted in length from 4 mm to 10 mm.
Stellite is picked-up from the magazine (5 rods 1000 mm in lenght each) and is then cut off by a cutting off wheel. Pre-shaped (square) stellite from 2,5 to 6,5 mm and round stellite from 3,2 to 6,4 mm dia can be used. No need for elaborate saw preparation and grinding of the saw tip before tipping. New tips can be directly welded onto existing tips.
Opcije (na upit)